Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
Model 830 Standard Wire Connections
Model 830 Wire Connections With Optional Boot Kit
Model 830 Suggested Mounting Methods
Model 830 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Typical Body Mount Hole Dimensions
MODEL
HOLE DIAMETER (Ø) *
DEPTH
830, et al
1.772" (45.00)
.80" (20)
Typical Bushing Mount Hole Dimensions
830, et al
1.125" (28.57)
.40" (10)
*Inch (mm) Tolerance Ø
+.001" (+.025)
-.000" (-.000)
Installation Notes:
the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)